Page 1 of 1

Paper production

Posted: Sun Oct 25, 2009 6:00 pm
by MikeOsborne
As I understand it, the paper used was supplied to the printers in individual sheets. However the word POSTAGE and the Mould Marks A2, B2 etc do not appear in the same position in relation to Control blocks. This suggests that the paper was manufactured in a size larger than a single sheet and then cut down to sheet size. Can anyone enlighten me as to the original size of the paper please.

Transfer from previous board: original post 895

Posted: Mon Oct 26, 2009 6:00 pm
by Mike Jackson
Mike, have you seen my article 'KGV Watermarked Papers' (GBJ, Vol. 28, pp. 106-114, 1990)?

Transfer from previous board: original post 1796

Posted: Fri Jul 15, 2011 7:00 pm
by GBCollector
Mike (J) Could you please advise how I might obtain a copy of your article?

Regards,
Richard.

Transfer from previous board: original post 1811

Posted: Wed Jul 20, 2011 7:00 pm
by GBCollector
Long shot but does anyone have a copy of Mike Jackson's article on KGV Watermarked Papers (GBJ, Volume 28 pp.106-114 - 1990).

Regards,
Richard.

Transfer from previous board: original post 1812

Posted: Wed Jul 20, 2011 7:05 pm
by Mike Jackson
Sorry Richard, I've put my article on my Web site at

http://www.mjpublications.com/downey/kg ... 06-114.pdf

Best wishes, Mike

Transfer from previous board: original post 1813

Posted: Wed Jul 20, 2011 7:10 pm
by Mike Jackson
PS. There's a bug in the Discussion Board program which adds unwanted characters to the link. Click on the link to open your browser, then remove the unwanted characters

Best

from the address, and press Return (Enter).

Mike

Transfer from previous board: original post 1814

Posted: Wed Jul 20, 2011 7:15 pm
by GBCollector
Thank you Mike, very much appreciated.

Richard.