Page 1 of 1
Paper production
Posted: Sun Oct 25, 2009 6:00 pm
by MikeOsborne
As I understand it, the paper used was supplied to the printers in individual sheets. However the word POSTAGE and the Mould Marks A2, B2 etc do not appear in the same position in relation to Control blocks. This suggests that the paper was manufactured in a size larger than a single sheet and then cut down to sheet size. Can anyone enlighten me as to the original size of the paper please.
Transfer from previous board: original post 895
Posted: Mon Oct 26, 2009 6:00 pm
by Mike Jackson
Mike, have you seen my article 'KGV Watermarked Papers' (GBJ, Vol. 28, pp. 106-114, 1990)?
Transfer from previous board: original post 1796
Posted: Fri Jul 15, 2011 7:00 pm
by GBCollector
Mike (J) Could you please advise how I might obtain a copy of your article?
Regards,
Richard.
Transfer from previous board: original post 1811
Posted: Wed Jul 20, 2011 7:00 pm
by GBCollector
Long shot but does anyone have a copy of Mike Jackson's article on KGV Watermarked Papers (GBJ, Volume 28 pp.106-114 - 1990).
Regards,
Richard.
Transfer from previous board: original post 1812
Posted: Wed Jul 20, 2011 7:05 pm
by Mike Jackson
Sorry Richard, I've put my article on my Web site at
http://www.mjpublications.com/downey/kg ... 06-114.pdf
Best wishes, Mike
Transfer from previous board: original post 1813
Posted: Wed Jul 20, 2011 7:10 pm
by Mike Jackson
PS. There's a bug in the Discussion Board program which adds unwanted characters to the link. Click on the link to open your browser, then remove the unwanted characters
Best
from the address, and press Return (Enter).
Mike
Transfer from previous board: original post 1814
Posted: Wed Jul 20, 2011 7:15 pm
by GBCollector
Thank you Mike, very much appreciated.
Richard.