Booklet Wrappers
-
- Posts: 14
- Joined: Thu Sep 27, 2007 6:00 pm
Booklet Wrappers
Some bundles of booklets have a wrapper that states:
"remove band and place in machine this side up"
but the bundles I have are some front cover up, some down,
some threads to left, some to right, and many are mixed.
Probably the booklets have been removed from the wrapper
for examination over the years, and replaced differently.
Does any one know the original orientation?
When you put your 2/- in the slot, which way did the
booklet come out?
-
- Posts: 219
- Joined: Sat Sep 19, 2009 6:00 pm
Transfer from previous board: original post 931
Normally the wrappers came the way that you have illustrated but the booklets have obviously been removed from the wrapper.
The booklets came with five threads to the left and five to right, presumably to balance the contents.
The booklets were dispensed thread first.
Cheers
Ron.
The booklets came with five threads to the left and five to right, presumably to balance the contents.
The booklets were dispensed thread first.
Cheers
Ron.
Transfer from previous board: original post 932
A little serious thought about these matters is usually what is needed
Of course the stitched side would go to the outlet first - it would reduce the likelyhood of a jam, caused by the booklet opening in the machine - in spite of the weight on top of the pile!
Of course the stitched side would go to the outlet first - it would reduce the likelyhood of a jam, caused by the booklet opening in the machine - in spite of the weight on top of the pile!