It is currently Mon Mar 08, 2021 8:34 pm (UTC [ DST ])



Post new topic Reply to topic  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Perforation errors
PostPosted: Sat Aug 28, 2010 7:00 pm 
Offline

Joined: Fri Aug 27, 2010 6:00 pm
Posts: 154
Dear All,

Perforator encroachments are well-known, and on the 1937 Coronation stamp occurred on most sheets, but usually only two or three holes, or five or six. The issue was only perforated on a type 5 machine.

I have an example that at a glance (in my case, without a lens) it looks like a type 6B machine has been used. Particularly interesting since this machine was used for the stop side of a sheet, and this is clearly a no-stop side.

On careful examination it is, obviously a major perforator encroachment. I would be pleased to know of any other similar examples, perhaps of a false type 6 machine?

Or maybe even other more extreme examples?

Thanks, and best wishes, Robin


Attachments:
1225_1.jpg
(2.42 MiB)
Top
 Profile  
 
 Post subject: Re: Perforation errors
PostPosted: Fri Nov 13, 2020 9:12 am 
Offline

Joined: Fri Jul 10, 2020 11:46 am
Posts: 5
Hi Robin

Here I also have a copy of the same encroachment on the same cylinder, however, mine even with a perf guide is accurate so not quite sure.

regards

Owen


Attachments:
Scan 7.jpeg
(1.09 MiB)
Top
 Profile  
 
 Post subject: Re: Perforation errors
PostPosted: Sun Nov 29, 2020 1:14 pm 
Offline

Joined: Fri Aug 27, 2010 6:00 pm
Posts: 154
Hi Owen,

Wonderful to get a reply, albeit ten years later than the question. Many thanks!

Since then I have a lot more experience studying perforator encroachments and false 6B perforations, nearly all with KE8 material. Even so I can only guess a comment on your block.

The panes were perforated seven at a time, that being the maximum number of sheets the machine could safely punch through without causing cloggings. This meant that there were seven copies of every remarkable deviant perforation and these would be virtually identical.

My guess is that your block and mine are from the same batch of seven that went into the machine and received that distinctive false 6B perforation.

Cheers! Robin


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group